Connections; Connector Information - Sirius Satellite Radio SiriusConnect SCC1 User Manual

Connections

Connector Information

Figure 1 identifies and describes the connectors on the SCC1 Vehicle Tuner. Figure 2
identifies the 8-pin pin-out configuration.
• SC OUTPUT: Connection for the SC Interface Cable.
• ANTENNA: Connection for the satellite antenna.
Connect to Sirius-Ready
Headunit or SiriusConnect
Interface Translator
Note 1: The Serial Data TX and RX lines in the SiriusConnect Interface cable are crossed.
Note 2: The Audio output is 1volt RMS.
[

Connections
7
6
3
1
]
figure 1
1 Battery
8
2 Power Enable
3 Serial Data (RX)
4
4 Ground
5
5 Audio Right
2
6 Serial Data (TX)
7 Audio Ground
1 Audio Left
figure 2