Table of Contents
Advertisement
Actiontec Wireless-Ready DSL Gateway User Manual
Gateway Features
This section contains a quick description of the Gateway's LEDs and switches.
Power LED - The Power LED displays the Gateway's current status. If the Power
LED glows steadily green, the Gateway is receiving power and fully operational.
When the Power LED is rapidly flashing, the Gateway is initializing. If the Power
LED is not illuminated when the power adapter is plugged in, the Gateway has
suffered a critical error and technical support should be contacted.
Internet LED - When the Internet LED glows steadily, the Gateway is connected
to the ISP.
Wireless LED - When the Wireless LED glows steadily, the Gateway is ready for
wireless networking.
Ethernet Network LED - The Ethernet Network LEDs glow when a network link
is established with a computer. A flashing LED signifies network traffic across the
specific Ethernet connection.
Reset Switch - Depressing the reset switch for one or two seconds will reset the
Gateway. To restore the Gateway's factory default settings, depress and hold the
Reset Switch for approximately 10 seconds.
36
Advertisement
Table of Contents
Need help?
Do you have a question about the Wireless–Ready DSL Gateway and is the answer not in the manual?
Questions and answers