Safety Messages - Teledyne MD300 Operating/Service Instructions Manual

Safety Messages

Your safety and the safety of others are very important. Please
carefully read the following safety messages.
Safety message are indented to alert the user of potential hazards.
Each safety message is associated with a safety alert symbol. These
symbols are found in the manual and on the instrument. The definition
of these symbols is described below:
CAUTION: Refer to the instructions for details on the
specific danger. These caution symbols warn of specific
procedures, which if not followed could cause bodily Injury,
and/or damage the instrument.
WARNING: This symbol is use to alert the operator of a
condition that could cause bodily harm.
NOTE: Additional information and comments regarding a
specific component or procedure are highlighted in the form
of a note.
CAUTION: THE MONITOR SHOULD ONLY BE USED FOR THE
PURPOSE AND IN THE MANNER DESCRIBED IN
THIS MANUAL.
IF YOU USE THE ANALYZER IN A MANNER OTHER
THAN THAT FOR WHICH IT WAS INTENDED,
UNPREDICTABLE BEHAVIOR COULD RESULT
POSSIBLY ACCOMPANIED WITH HAZARDOUS
CONSEQUENCES.
Teledyne Analytical Instruments
AD300/MD300
iv