Table of Contents
Advertisement
Symbols
Previous measurements stored in memory.
Average data
The battery power indicator during
measurement.
Full Battery
The battery is low when it blinks.
Low Battery
Unstable blood pressure due to
movement during measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during the inflation.
The cuff is not applied correctly.
The pulse is not detected correctly.
PUL. DISPLAY ERROR
Blood pressure monitor internal error
SYS.
Systolic blood pressure in mmHg
DIA.
Diastolic blood pressure in mmHg
PUL./min.
Pulse per minute
AM
Data taken between 4:00 and 9:59
PM
Data taken between 18:00 and 1:59
Symbols
Function / Meaning
English 5
Recommended Action
Replace all batteries with new
ones when the mark blinks.
Take another measurement.
Remain very still during
measurement.
Apply the cuff correctly,
and take another
measurement.
Remove the batteries and
press the START button,
and then install the batteries
again. If the error still
appears, contact the dealer.
Hide quick links:
Advertisement
Table of Contents
