1. Manuals
  2. Brands
  3. Scytek electronic Manuals
  4. Car Alarm
  5. P10 Series
  6. Product manual

Scytek electronic P10 Series Product Manual

Vehicle security system
Hide thumbs
Table of Contents

Advertisement

Quick Links

P10 SERIES
VEHICLE SECURITY SYSTEM
PRODUCT MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P10 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Scytek electronic P10 Series

Summary of Contents for Scytek electronic P10 Series

  • Page 1 P10 SERIES VEHICLE SECURITY SYSTEM PRODUCT MANUAL...
  • Page 2 Limited Lifetime Warranty This vehicle security system is warranted to the original purchaser, to be free from defects in material and workmanship. The manufacturer will repair or replace at its option, and free of charge for the first twelve (12) months, any part that proves defective in material or workmanship under normal installation, use, and service, provided the product is returned to the manufacturer freight prepaid.

  • Page 3: Table Of Contents

    Table of Contents About Your System ............Page 1 Remote Transmitters .

  • Page 5: About Your System

    About Your System Congratulations on your purchase of this state-of-the-art vehicle security system . With proper installation this system will provide superior protection and performance for many years to come. System Contents: Main Unit • Two 2-Button Remote Transmitters • High Output 6-tone Siren •...

  • Page 6: Remote Transmitters

    Remote Transmitters Remote Transmitter Description Button 1 Button 2 Button 4 Button 3 The A10-4B is supplied with two 4-button Remote Transmitters used to control system operations. Button 1 Arms the system and when held for 2 seconds, activates the system’s Panic feature. Button 1 also locks the doors when the system is in Valet Mode.
  • Page 7 A10-4B - Page 3...

  • Page 8: System Operation

    System Operation Remote Arming The system monitors 3 independent areas ( zones ) while armed: doors, hood/trunk, and shock sensor input. To Arm the System: 1. Turn off the ignition. 2. Press Button 1. · The siren will chirp once.* ·...

  • Page 9: Passive Arming

    2. Open the door and exit the vehicle. · Once all doors are closed and the dome light is off, the LED will begin flashing rapidly. 3. After 30 seconds, · The siren will chirp. · The parking lights will flash. ·...

  • Page 10: Optional Coded Emergency Override

    · The system will disarm. If the code is entered incorrectly, turn off the ignition and begin again. To set the Emergency Override Code: 1. Turn on ignition. 2. Within 5 seconds, press the valet switch 5 times. · The siren will provide one long chirp, indicating that you have entered Programming. 3.

  • Page 11: Extended Features

    Extended Features Ignition Controlled Door Locks For added safety, the Ignition Door Locking feature allows vehicles equipped with power door lock systems to automatically lock the doors when the ignition is turned on, and unlock the doors after the ignition key is turned off. If a door is open when the ignition is turned on, the ignition locking feature is disabled to protect against locking the keys inside the vehicle.

  • Page 12: System Installation

    System Installation 1. Thoroughly read and become familiar with the installation instructions before beginning the installation. 2. Review system contents: Main Unit Two 2-Button Remote Transmitters Siren Shock Sensor Harnesses 8-Pin main harness • 4-Pin main harness • 4-Pin shock sensor harness •...

  • Page 13: Mounting The Control Unit

    Mounting the Control Unit The control unit must only be mounted in the interior of the vehicle. Do not mount the main unit in the engine compartment. Choose a mounting location that will not be easily accessible to a thief, and will not interfere with the operation of any vehicle components such as foot pedals, steering column, air vents, seat rails, etc.

  • Page 14: System Wiring

    System Wiring 8-Pin Main Harness Pin 1 ORANGE WIRE: Armed Output (-) 500mA. The ORANGE wire provides a ground output while armed to activate an optional starter defeat relay or other device such as a power window control module. Pin 2 BLUE WIRE: Trunk/Hood trigger Input (-). Connect the BLUE wire to the trunk and/or optional hood pin switches.

  • Page 15: System Programming

    System Programming Entering System Programming To enter System Programming: 1. Turn on ignition. 2. Within 5 seconds, press the valet switch 5 times. · The siren will provide one long chirp, indicating that you have entered Programming. 3. Press the valet switch the number times equal to the System Parameter you want to change. ·...
  • Page 16 1. Horn Chirps with Arm & Disarm. Selects one of three modes: Normal, Horn Chirps, and Horn Chirps w/Warn. Normal. When selected, the horn will honk only when the alarm is triggered. Horn Chirps. When selected, the horn will provide the arm/disarm and trigger indications, allowing the siren installation to be skipped.

  • Page 17: Door Lock Diagrams

    Door Lock Diagrams Follow the diagrams below for connecting basic door lock systems. For Two Stage door lock systems (separately unlocks driver and passenger doors) see following pages. Negative Trigger Adding Actuators Reverse Polarity Vacuum Starter Intrrupt A10-4B - Page 13...
  • Page 18 Wiring Diagrams Positive Dome Light Negative Dome Light Positive Horn Honk Negative Horn Honk Page 14 - A10-4B...
  • Page 19 A10-4B - Page 15...

  • Page 20: Wiring Diagram

    Wiring Diagram Impact Sensor Green - Lock Out (-) Blue - Unlock Out (-) Valet Switch Orange - Starter Interrupt Output (-) Blue Blue - Trigger (-) Black/White -Interior Light Output (-) Brown/White - Horn Output (-) Control Unit Gray - Trunk Release Output (-) Brown - Siren Output (+) Green - Door Trigger Input (-) Purple - Door Trigger Input (+)

Table of Contents