Remote Telnet - ActionTec V1000H User Manual

Remote Telnet

The Remote Telnet screen allows you to set up the Modem Router so that it can be
accessed from a remote (not local) telnet device. To use:
Remote Telnet from the menu on the left side of any Advanced Setup
1. Click
screen. The Remote Telnet screen appears.
2. Click in the Enable radio button next to Remote Telnet to activate.
3. Enter a username and password in the appropriate text boxes beneath step 2.
4. Select the idle disconnect time. If you select one of the time periods provided
in the drop-down list, remote telnet management of the Modem Router will
stop after the selected time period, if no actions are detected.
Apply to save your changes.
5. Click
Chapter 5 Advanced Setup
53