Static Routing
The Static Routing screen allows you to set up static routes on the Modem Router.
To use:
1.
Click
Static Routing from the menu on the left side of any Advanced Setup
screen. The Static Routing screen appears.
2.
Enter the destination IP address of the static route in the Destination IP
text box.
3.
Enter the subnet mask IP address in the Subnetmask text box.
4.
If applicable, enter the gateway IP address in the Gateway IP text box.
5.
Select a WAN interface from the WAN Interface drop-down list.
Apply to save your changes.
6.
Click
Chapter 5 Advanced Setup
55