ActionTec V1000H User Manual page 50

2. Enter the new modem IP address and modem subnet mask in the appropriate
text boxes.
Apply and Reboot. The Modem Router reboots with the new settings.
3. Click
To change the Modem Router's DHCP settings:
Enable to activate the Modem Router's DHCP server.
4. Click
5. Enter the DHCP server's beginning IP address, ending IP address, and subnet
mask address in the appropriate text boxes.
6. Enter the DHCP server's lease time period by entering the days, hours, and
minutes in the appropriate text boxes.
7. Set the DNS values by selecting Dynamic or Static (clicking in the appropriate
radio button), then, if needed enter the IP addresses for DNS server 1 and 2.
Apply to save your changes.
8. Click
Chapter 5 Advanced Setup
47