Table of Contents
Advertisement
SLEEP
Selects whether the LCD is turned off or not when any
camera operation is not carried out for more than 5
minutes.
ON
LCD is turned off when any camera operation is not
carried out for more than 5 minutes. Press SET button to
be active the camera.
OFF
LCD is not turned off.
OP SKIP Selects whether the overcoating process on the print is
skipped or not.
ON
Overcoating process is skipped.
OFF
Overcoating process is carried out.
MARGIN CUT
paper is cut or not.
ON
Margin is cut.
OFF
Margin is not cut.
DPS
ON
When you connect this system with DPS Click, select
ON.
OFF
When you do not connect this system with DPS Click,
select OFF.
CONNECTING WITH DPS SYSTEM
This camera can be connected with DPS Click system by
equipping AC adapter (option) as a power supply.
1 In camera mode, press CAMERA/PLAY button for 3
seconds.
2 The total number of prints is displayed.
3 Press SET or CAMERA/PLAY button to return to the
operation mode.
When DPS mode is ON, this function is not active.
30
SUB MENU
Selects whether the margin of the printed
CHECKING TOTAL NUMBER OF PRINTS
NOTE
Advertisement
Table of Contents
