Table of Contents
Advertisement
ADJUSTING THE COLOR OF IMAGE (WHITE BALANCE)
Default setting is flash light W.B. If you are not satisfied with this
setting, please proceed as follows.
1 Place a piece of white paper in front of the camera and
display it to cover the LCD.
Place the white paper at the actual position of a person who is
taking a picture from the camera.
The memorized picture should not be completely white. It is
necessary that the picture is a little bit dark, means slightly
gray.
Also, the back flash should be turned off.
2 Take a picture.
Press SHOT button.
3 Press CAMERA/PLAY button to switch the camera to
CAMERA mode.
4 Press SET button for more than 3 seconds.
MENU is displayed.
5 Press T(+) or W(-) button to select WB.
6 Press SET button.
The WB menu is displayed.
16
NOTE
a piece of
white paper
actual distance of the
person who is taking the
picture
camera
Advertisement
Table of Contents
