Table of Contents
Advertisement
6 Press EV button to adjust brightness when taking picture.
EXP. is displayed.
•
If FLASH : OFF is selected on CAPTURE menu, EV is
displayed.
7 Press T (+) or W (-) button to adjust the brightness.
To make an image brighter, increase the value.
To make an image darker decrease the value.
8 Press SET button.
9 Press SHOT button halfway to adjust focus.
During focus adjusting, the focus mark ( ) is blinking.
When focus is adjusted, the focus mark stops blinking.
A Press SHOT button down completely to take a picture.
The image is memorized in the camera. When an image is
memorized, II mark will appear.
The camera is switched to PLAY mode. A mark
displayed.
Shows memorization completed.
Position the image memorized
(when using Compact Flash)
•
Four images can be memorized in the camera.
•
When a Compact Flash is inserted, the images are
memorized in the Compact Flash first.
B When taking more pictures, press CAMERA/PLAY button.
Switch the camera to CAMERA mode. Then, repeat the above
steps 9 to 10.
•
If brightness of the image is not adjusted correctly, repeat
the above steps 6 to 10.
12
NOTE
Focus mark
Position the image memorized
(when not using Compact Flash)
NOTE
will be
PLAY mode mark
Advertisement
Table of Contents
