Table of Contents
Advertisement
7 Change EXP. CENTER value.
Repeat increasing the EXP.CENTER value by 5 starting from
260. (Use T(+) button to increase the value.)
Take a picture and check the brightness in the picture at every
increase of the EXP.CENTER value.
As the EXP. CENTER value increases, the image gets
brighter, however, the image stops getting brighter at a certain
value.
This is the maximum EXP. CENTER value.
8 Set EXP. CENTER value.
Decrease the maximum EXP. CENTER value by 5. Set this
value as EXP. CENTER. (Use W(-) button to increase the
value.)
The value decreased from the maximum EXP. CENTER value
depends on the flash in use.
9 Press SET button.
A Press T(+) or W(-) button to select <BACK to finish the iris
setting menu.
B Press SET button.
15
Advertisement
Table of Contents
