Mitsubishi Electric DLP UD8850U User Manual page 76

Specifications (continued)
Specification of RGB signals in each computer
mode of the projector (continued)
Important:
• Some computers aren't compatible with the
projector.
• The projector's maximum resolution is 1920 x
1200 pixels. It may not display images of higher
resolutions than 1920 x 1200 correctly.
• Images with SYNC on G (Green) signal may jitter.
• Images with SYNC on G (Green) signal may be
tinged with green.
• If the resolution and frequency of your computer
aren't shown on the table, find the compatible
resolution and frequency by changing the resolution
of your computer.
• TV60 and TV50 are equivalent to 480i and 576i
respectively. When these signals are supplied to the
VIDEO IN or S-VIDEO IN terminal, the signal mode is
indicated as TV60 or TV50. When they are supplied to
the COMPUTER/COMPONENT VIDEO IN terminals,
the signal mode is indicated as 480i or 576i.
Available signal system for SDI
(for UD8900U only)
SD-SDI
HD-SDI 720/50p
720/60p
1080/50i
1080/60i
1080/24p
3G-SDI 1080/50p
1080/60p
• The signal format supports 1/1.001.
480i
576i
• This projector doesn't support 480p signals from
video devices having 4 lines (R, G, B, CS*) or having 5
lines (R, G, B, H, V).
* : Composite Sync
NATIVE mode
When moire patterns or lines of uneven thickness
appear on the projected image, these symptoms may
be improved by displaying it in its original image size
(NATIVE mode). To display the image in the NATIVE
mode, set ASPECT of the SIGNAL menu to NATIVE.
(See page 31 for menu setting.)
• For signals that are larger than the panel resolution,
only their center part is displayed in the NATIVE
mode. The area exceeding the panel resolution isn't
displayed.
• In the NATIVE mode, images are black-framed
when the image resolution is lower than the panel
resolution.
• In the NATIVE mode, some signals may be
displayed with a black frame even when they have
a higher resolution than the panel resolution.
EN-76