Mitsubishi Electric DLP UD8850U User Manual page 45

Adjusting projected images (continued)
Adjusting the fineness of the image (SUPER RESOLUTION):
You can adjust the fineness of the image using the menu.
(See page 31 for menu setting.)
With the IMAGE menu:
1. Display the IMAGE menu.
2. Select SUPER RESOLUTION by pressing the  or  button.
3. Press the  or  button to select ON
4. Press the ENTER button.
5. Make adjustment using the  or  button.
Important:
When you make SUPER RESOLUTION adjustment, the colors of the menu may be obscured, but this is not a
•
failure.
• You can adjust SUPER RESOLUTION also by pressing the SUPER RESOLUTION button on the remote control.
With the remote control:
1. Press the SUPER RESOLUTION button on the remote control.
A window for SUPER RESOLUTION adjustment appears on the upper right of the screen.
2. Press the  or  button to select ON
3. Press the ENTER button.
4. Make adjustment using the  or  button.
Adjusting the tone of each color (COLOR MATRIX):
You can adjust the tone of each color using the menu.
(See page 31 for menu setting.)
1. Display the IMAGE menu.
2. Select COLOR MATRIX by pressing the  or  button.
3. Press the  or  button to select USER
4. Press the ENTER button.
5. Select an item you want to set using the  or  button.
• To set COLOR MATRIX that is used as the base, select BASE.
• If you want to adjust the saturation of all colors of the image, select
SATURATION.
• If you want to adjust the balance of all colors of the image, select RGB-TINT.
6. Press the  or  button to adjust the color balance of the selected color.
7. Repeat steps 5 and 6 for optimum adjustment results.
When the input signal is VIDEO or COMPUTER, the items in the COLOR MATRIX-USER menu are automatically
•
set to the predetermined values. You can change these values manually.
• To disable the COLOR MATRIX adjustment, select FLAT in step 3.
When you make COLOR MATRIX adjustment, the colors of the menu will change, but this is not a failure.
•
Adjusting the detailed setting of ASPECT :
You can adjust the detailed setting of ASPECT using the menu.
(See page 31 for menu setting.)
1. Display the SIGNAL menu.
2. Select ASPECT by pressing the  or  button.
3. Press the  or  button to select USER
• ASPECT-USER setting supports the COMPUTER1, COMPUTER2, DVI,
and HDMI terminals only. Therefore, you cannot select USER for other
terminals.
4. Press the ENTER button.
5. Select an item you want to set using the  or  button.
ZOOM(H)
The horizontal image size is adjusted using the center of the image as the base point. The setting range is 50% to
500%.
.
.
.
.
EN-45
SUPER RESOLUTION
SUPER RESOLUTION
LEVEL
COLOR MATRIX
COLOR MATRIX−USER
BASE
RED
YELLOW
GREEN
CYAN
BLUE
MAGENTA
SATURATION
RGB-TINT
ASPECT USER
−
ZOOM(H)
ZOOM(V)
HORIZ. POSITION
VET. POSITION
RASTER POSITION(H)
RASTER POSITION(V)
RESET
ON
1
COMPUTER
COMPUTER
0
0
0
0
0
0
0
0
100
100
0
0
0
0
OK