Setting The Screen Size - Mitsubishi Electric DLP UD8850U User Manual

Viewing computer images (continued)

Setting the screen size

Change the setting of the SCREEN according to the type of the screen to be used.
(See page 31 for menu setting.)
1. Display the INSTALLATION 2 menu.
2. Select SCREEN by pressing the  or  button.
3. Select your desired aspect ratio by pressing the  or  button.
• You can select the aspect ratio from 16:10, 16:9, and 4:3.
To cancel the menu:
4. Press the MENU button.
Setting the aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the
setting according to the type of the screen to be used or your preference.
How to change the settings:
With the remote control:
1. Press the ASPECT button.
• Every time the ASPECT button is pressed, the aspect mode changes from NORMAL to 16:9, to NATIVE, to
FULL, to USER and back to NORMAL.
• When 16:9 is selected by SCREEN, 16:9 cannot be selected.
• The following table shows the image display patterns depending on the settings.
When SCREEN is 16:10:
Setting
Input video signal is displayed
at the max height (1200 pixels)
or max width (1920 pixels) of
the panel while its aspect ratio
is maintained.
Input signal
UXGA signal
1600 x 1200
(4:3)
WUXGA signal
1920 x 1200
(16:10)
1080p signal
1920 x 1080
(16:9)
With the SIGNAL menu:
(See page 31 for menu setting.)
1. Display the SIGNAL menu.
2. Select ASPECT by pressing the  or  button.
3. Select your desired aspect ratio by pressing the  or  button.
To cancel the menu:
4. Press the MENU button.
Important:
• In such cases as when you keep projecting images in the narrower area than the screen for a long time and then
change the mode to FULL, the masking areas may remain as afterimage around the displayed image. Consult
your dealer in this case.
• If you change the screen setting, the aspect setting is automatically changed to NORMAL. Therefore, in such a
case, set the desired aspect ratio again.
NORMAL
Regardless of the type of input
signal, image is displayed at
16:9 aspect ratio (1920 x 1080
pixels). Select to expand
squeezed (or horizontally
compressed) images such as
DVD images to 16:9.
4:3
1600 x 1200
16:10
1920 x 1200
16:9
1920 x 1080
16:9
Input video signal is displayed
at its original pixel size. (When
the pixel size is larger than the
panel size, only the center part
of the image is displayed.)
16:9
1920 x 1080
16:9
1920 x 1080
16:9
1920 x 1080
EN-24
1 2
1 2
INSTALLATION 2
AUTO POWER ON
AUTO POWER OFF
SCREEN
IMAGE CAPTURE
SPLASH SCREEN
ON
BACK COLOR
DVI LONG CABLE
REMOTE 1 MODE
FILTER MENU
NATIVE
Regardless of the type of input
signal, image is displayed at
the full panel size (1920 x 1200
pixels).
4:3
1600 x 1200
16:10
1920 x 1200
16:9
1920 x 1080
SIGNAL
MEMORY CALL
A
U
ASPECT
opt.
OFF
5min
16:10
SETUP
ON
BLUE
AUTO
ENTER
ENTER
FULL
16:10
1920 x 1200
16:10
1920 x 1200
16:10
1920 x 1200
AUTO
NORMAL