Network Menu - Mitsubishi Electric DLP HC7800D User Manual

Menu operation (continued)

NETWORK menu

NETWORK
ITEM
PROJECTOR NAME
NETWORK PASSWORD
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
PJLink CERTIFICATION
NETWORK RESET
opt.
PROJECTOR
NAME
NETWORK
OK
PASSWORD
IP CONFIG OK
PJLink
ON
CERTIFICATION
NETWORK RESET OK
SETTING
xxxxx...
SET
OK
OK
ON / OFF
xxx. xxx. xxx. xxx
SET
xxx. xxx. xxx. xxx
SET
xxx. xxx. xxx. xxx
SET
xx-xx-xx-xx-xx-xx
ON / OFF
OK
opt.
NETWORK
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT
GATEWAY
MAC ADDRESS
FUNCTION
Displays PROJECTOR NAME. Displays PROJECTOR NAME in
blank when PROJECTOR NAME is not set. (See page 44.)
Set the name to identify the projector. Enter up to 15 characters
(alphabets or numeric characters). (See page 44.)
Set the password for Web control or PJLink certification. (See
page 44.)
Select this setting for IP Configuration. (See page 45.)
Use this setting when you obtain IP CONFIG automatically by
DHCP server.
Displays IP ADDRESS. However, IP ADDRESS is not set as factory
default, and cannot be displayed.
Set IP ADDRESS. When DHCP is set to ON, you cannot change
this setting.
Displays SUBNET MASK. However, SUBNET MASK is not set as
factory default, and cannot be displayed.
Set SUBNET MASK. When DHCP is set to ON, you cannot change
this setting.
Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is
not set as factory default, and cannot be displayed.
Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot
change this setting.
Displays MAC ADDRESS.
Select whether to enable the PJLink certification or not. Select ON
for normal use. (See page 46.)
Resets the Network Setting. (See page 46.)
EN-35
ON
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
XX-XX-XX-XX-XX-XX