Network Menu - Mitsubishi Electric XD250U-ST User Manual

Menu operation (continued)
4. SINGAL menu
Menu option Setting
HORIZ. POSITION 0-999
VERT. POSITION 0-999
FINE SYNC. 0-31
TRACKING 0-2800
AUTO
RGB
COMPUTER INPUT
YC C /YP
B R
OVER SCAN 100%-90%
HOLD OFF / ON
USER OK
CLAMP POSITION 1-255
CLAMP WIDTH 1-63
VERT.SYNC AUTO / OFF
LPF ON / OFF
SHUTTER(U) 0-20
SHUTTER(L) 0-20
SHUTTER(LS) 0-20
SHUTTER(RS) 0-20
• Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.
• When you change the value of the horizontal or vertical position drastically, noise may appear.
• The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value
is changed. These conditions are not a malfunction.
• SHUTTER does not work correctly during keystone adjustment.
• When you increase the value of OVER SCAN, noise may appear on the screen.
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.

5. NETWORK menu

Menu option
*****
PROJECTOR NAME
SET
NETWORK PASSWORD OK
IP CONFIG OK
DHCP ON
***,***,***,***
IP ADDRESS
SET
***,***,***,***
SUBNET MASK
SET
***,***,***,***
DEFAULT GATEWAY
SET
MAC ADDRESS xx-xx-xx-xx-xx-xx
PJLink CERTIFICATION ON
NETWORK RESET OK
Select this setting to adjust the horizontal position of projected images.
Select this setting to adjust the vertical position of projected images.
Select this setting to eliminate flickering or blurs, if they appear, when
you are viewing projected images.
Select this setting to eliminate vertical wide stripes, if they appear, when
you are viewing projected images.
Automatically sets the appropriate setting.
Select this setting when you connect the projector to high definition
video equipment having R, G, and B output terminals.
Select this setting when you connect the projector to a DVD player or
P other device having Y, C
B R
output terminals.
Use this setting to adjust the display area of projected images.
Use this setting to adjust projected images when flagging occurs in the
upper area of the screen.
Use this setting to correct solid white or solid black that appears in pro-
jected images.
Use this setting to correct solid black that appears in projected images.
Use this setting to adjust projected images when the motion is not
smooth. Select AUTO for most cases.
Select this setting to enable or disable LPF.
Use this setting to adjust projected images when noise appears in the
top part of the image.
Use this setting to adjust projected images when noise appears in the
bottom part of the image.
Use this setting to adjust projected images when noise appears in the
left half of the image.
Use this setting to adjust projected images when noise appears in the
right half of the image.
Setting
Displays PROJECTOR NAME. Displays PROJECTOR NAME in
...
blank when PROJECTOR NAME is not set.
Set PROJECTOR NAME. Enter up to 15 characters (alphabets or
numeric characters).
Set the password for Web control or PJLink certification.
Select this setting for IP Configuration.
Use this setting when you obtain IP CONFIG automatically by
/ OFF
DHCP server.
Displays IP ADDRESS. However, IP ADDRESS is not set as factory
default, and cannot be displayed.
Set IP ADDRESS. When DHCP is set to ON, you cannot change
this setting.
Displays SUBNET MASK. However, SUBNET MASK is not set as
factory default, and cannot be displayed.
Set SUBNET MASK. When DHCP is set to ON, you cannot change
this setting.
Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is
not set as factory default, and cannot be displayed.
Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot
change this setting.
Displays MAC ADDRESS.
/ OFF Use this setting for PJLink Certification.
Resets the Network Setting.
Feature description
, and C (or Y, P , and P ) component video
B R B R
Feature description
opt.
SIGNAL
HORIZ. POSITION 0
VERT. POSITION 0
FINE SYNC. 0
TRACKING 0
COMPUTER
RGB
INPUT
R G B R G B
OVER SCAN 100%
HOLD OFF
USER OK
opt.
SIGNAL
USER
CLAMP
1
POSITION
CLAMP WIDTH 1
VERT. SYNC. AUTO
?
LPF OFF
SHUTTER(U) 0
SHUTTER(L) 0
SHUTTER(LS) 0
SHUTTER(RS) 0
SIGNAL USER menu
opt.
NETWORK
PROJECTOR
SET
NAME
NETWORK
OK
PASSWORD
OK
IP CONFIG
PJLink
ON
CERTIFICATION
NETWORK RESET OK
opt.
NETWORK
IP CONFIG
DHCP ON
IP ADDRESS 192.168.0.10
255.255.255.0
SUBNET MASK
DEFAULT
10.132.1.1
GATEWAY
MAC ADDRESS xx-xx-xx-xx-xx-xx
NETWORK IP CONFIG
menu
EN-23