Network Menu - Mitsubishi Electric UL7400U Manual

5.6.5 NETWORK menu

ITEM
PROJECTOR NAME
NETWORK RESTART
• Some commands are not executed depending on the input signal. The operational restrictions same as those
on the menu setting are applied. Refer to "Menu operation" in the User Manual for more details.
How to set the value
Use the character or ASCII code as shown below to set the value.
Character +
ASCII code '2Bh' '2Dh' '30h' '31h' '32h' '33h' '34h' '35h' '36h' '37h' '38h' '39h'
[Example 1] When setting the AUTO POWER ON to ON. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '41' '50' '4F' '4E' '31' '0D'
00APON1
[Example 2] When setting the CONTRAST R of the COLOR TEMP.-USER to +10, the CONTRAST G to 0, and the
CONTRAST B to -5. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '50' '2B' '31' '30' '2B' '30' '30' '2D' '30' '35' '0D'
00P+10+00-05
[Example 3] When checking the TINT setting (when the TINT is set to +10). (Values enclosed in quotation marks
are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '53' '0D'
00S
[Example 4] When setting the GAMMA MODE of the COLOR ENHANCER-USER to DETAIL. (Values enclosed in
quotation marks are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '43' '45' '55' '31' '47' '53' '32' '0D'
00CEU1GS2
Function
Character
NAME 4Eh 41h 4Dh 45h
NRCN 4Eh 52h 43h 4Eh
- 0 1 2
'30' '30' '41' '50' '4F' '4E' '31' '0D'
00APON1
'30' '30' '50' '2B' '31' '30' '2B' '30' '30' '2D' '30' '35' '0D'
00P+10+00-05
'30' '30' '53' '2B' '31' '30' '0D'
00S+10
'30' '30' '43' '45' '55' '31' '47' '53' '32' '0D'
00CEU1GS2
ASCII code
Up to 15 single-byte alphanumeric characters
3 4 5 6
Status code returned
from the projector
Status code returned
from the projector
Status code returned
from the projector
Status code returned
from the projector
13
Data
7 8 9
Description
Command for setting the AUTO
POWER ON to ON
Command receipt confirmation
(Command echo back)
Description
Command for setting the
picture control
Command receipt confirmation
(Command echo back)
Description
Command for checking the
TINT setting
Check result (+10)
Description
Command for setting the
picture control
Command receipt confirmation
(Command echo back)