Onboard Device Settings - Acer AcerPower SN Service Manual

Onboard Device Settings

The following screen shows the Onboard Device Settings sub-menu:
The following table describes the parameters found in this sub-menu. Settings in boldface are the default and
suggested settings.
Parameter
Floppy Disk Controller
IDE Controller
PS/2 Mouse Controller
USB Host Controller
USB Legacy Mode
Onboard Audio Chip
Chapter 2
Description
Lets you enable or disable the onboard
floppy disk controller.
Lets you enable or disable the onboard
primary, secondary or both IDE interfaces.
Lets you enable or disable the onboard PS/2
mouse controller.
Lets you enable or disable the onboard USB
host controller.
Lets you activate or deactivate the USB
keyboard connected to your system. When
activated, the USB keyboard functions in a
DOS environment.
Lets you activate or deactivate the audio
controller on board.
Options
Enabled or Disabled
Primary, Both, or Disabled
Enabled or Disabled
Enabled or Disabled
Enabled or Disabled
Enabled or Disabled
21