3.5.3
Onboard Device Settings
The Onboard Device Settings menu allows you to configure the device controllers
available onboard.
displays the following screen:
Floppy Disk Controller .............. [Enabled ]
IDE Controller ...................... [Both ]
PS/2 Mouse Controller ............... [Enabled ]
USB Host Controller ................. [Enabled ]
USB Legacy Mode ................... [Disabled]
Onboard Audio Chip .................. [Enabled ]
↑↓ = Move Highlight Bar
Esc = Exit
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk controller.
IDE Controller
Set this parameter to
to enable only the secondary IDE channel;
secondary IDE channels; or
PS/2 Mouse Controller
This parameter enables or disables the onboard PS/2 mouse controller.
Selecting this option from the Onboard Peripherals menu
Onboard Device Settings
to enable only the primary IDE channel;
Primary
Disabled
F1 = Help
→ ← = Change Setting,
to enable both primary and
Both
to disable the onboard IDE controllers.
Page 1/1
Secondary
Chapter 3 - BIOS Utility 3-17