Ip Address Settings - Mitsubishi Electric DLP XD700U User Manual

Network settings (continued)
5. Select OK, and NEW NETWORK PASSWORD
screen appears if the entered password is correct.
• If the entered password is not correct, the
CURRENT NETWORK PASSWORD screen
appears again.
NEW NETWORK PASSWORD
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
CONFIRM NETWORK PASSWORD
∗∗∗∗∗∗
A B C D E
N O P Q R
0 1 2 3 4
OK
6. Enter the NEW NETWORK PASSWORD and
CONFIRM NETWORK PASSWORD.
• Password can be set using up to 32 characters
including alphabets (capital/small) or numeric
characters.
← key:
Shifting the position of enter
cursor to the left for each
character.
→ key:
Shifting the position of enter
cursor to the right for each
character.
key: Shifting the position of
enter cursor between NEW
NETWORK PASSWORD
and CONFIRM NETWORK
PASSWORD.
DEL key: Deleting the character in the
position of enter cursor for each
character.
caps/CAPS key: Switching an alphabet character
to CAPITAL or small.
CLEAR key: Deleting all the entered
characters.
7. When NEW NETWORK PASSWORD and CONFIRM
NETWORK PASSWORD are matched, the setting is
completed after changing the Network Password.
• If the entered content is not matched, NEW
NETWORK PASSWORD screen appears again
after an error dialog is displayed.
• It may take some time to reflect the settings.
← →
F G H I J K L M DEL
S T U V W X Y Z caps
5 6 7 8 9 CLEAR
CANCEL
IP Config settings
(See page 22 for menu setting.)
1. Display the Network Config menu.
2. Press the  or  button to select IP Config.
IP Config
3. Press the ENTER button.
• The IP Config menu appears.
DHCP
IP Address
Subnet Mask
Default Gateway
MAC Address
DHCP Function
Start IP Address
End IP Address
IP Config Setup
Setting or clearing DHCP
1. Display the IP Config menu.
2. Press the  or  button to select DHCP.
DHCP
3. Press the  or  button to select On or Off.
• To cancel the setting, press the MENU button.
• When DHCP is set to On, IP Address, Subnet
Mask, Default Gateway, and DHCP Function
cannot be set. If you want to set these settings,
set DHCP to Off and perform the IP settings as
follows.

IP Address settings

1. Display the IP Config menu.
2. Press the  or  button to select IP Address.
IP Address
3. Press the ENTER button.
• The first octet is selected.
IP Address
4. Press the  or  button to select the numeric
value.
5. Press the  or  button to select the octet.
• The second or final octet is selected.
IP Address
6. Press the ENTER button.
• To cancel the setting, press the MENU button.
• Set the numeric value within the range from 0 to
255. However, set the numeric value for the final
octet within the range from 1 to 254.
EN-35
OK
IP Config
On
169 254
- -
255 255
- -
169 254
- -
xx-xx-xx-xx-xx-xx
Off
169 - 254 -
169 254 254
- -
OK
Adjust Exit
MENU
Select
On
169 254
- -
169 254
- -
169 254
- -
0 220
-
0 0
-
0 1
-
0 221
-
254
-
0 220
-
0 220
-
0 220
-