CONTROLS AND INSTRUMENTS
speed.
– Increasing pressure on the
pedal progressively increas-
es the speed of the machine.
– The pedal automatically goes
into neutral «N» when
released.
– The neutral condition «N» is
shown by the lighting of an
indicator light (4.10.g).
4.33 R
EVERSE PEDAL
This pedal engages reverse
drive in the wheels and modu-
lates the machine's speed.
– Increasing pressure on the pedal progressively
increases the speed of the machine
– The pedal automatically goes into neutral «N»
when released.
– The neutral condition «N» is shown by the lighting of an indicator light
(4.10.g).
WARNING!
!
stopped.
NOTE
(4.5) is engaged, the engine stops.
4.34 L
EVER TO RELEASE THE HYDROSTATIC TRANSMISSION
This lever has two positions as shown on the label:
«A» = Transmission engaged: for all usage conditions, when moving
«B» = Transmission released: considerably reduces the effort required
Reverse must be engaged only when the machine is
If one of the drive pedals is used when the parking brake
and during cutting;
for moving the machine by hand, with the engine turned off.
4.31
4.32
N
F
N
R
4.33
4.34
A
EN 21
B