Push-Button For Reverse Mowing; Blade Engagement And Brake Control - Honda HF2315HME User Manual

CONTROLS AND INSTRUMENTS
correspond to just as many cutting heights. Their values are indicated in the
"Specifications table" (☛ Chapter 9).
– To go from one height to another, press the release button at the end of the
lever.
4.7 P -
USH BUTTON FOR REVERSE MOWING
By keeping the push-button pressed, it is possible to engage the reverse gear and
go backwards even with the blades engaged, without causing the engine to stop.
4.8 B
LADE ENGAGEMENT AND BRAKE CONTROL
➤
HF2•••SBE
The lever (4.8.1) has two positions, as shown on the
label and correspond to:
«A» = Blades disengaged
«B» = Blades engaged
➤
HF2315HME
The lever (4.8.2) inserts the blades with a pneumatic
clutch and has two positions, as shown on the label.
They correspond to:
«A» = Blades disengaged
«B» = Blades engaged
– The "Blades engaged" condition is indicated by a
pilot lamp (4.10.c).
➤
HF2620◊••
The mushroom switch (4.8.3) is for engaging the
blades by an electromagnetic clutch:
«A» Pressed
«B» Pulled
– The "Blades engaged" condition is indicated by a
pilot lamp (4.10.c).
HF2417◊••
= Blades disengaged
= Blades engaged
4.8.1
A
B
4.8.2
A
B
4.8.3
A
EN 17
B