Table of Contents
Advertisement
ASSEMBLY
20
• Insert six #6 x 1" screws into the handlebar assembly, as shown.
Tighten the screws.
Grip
21
• Fit a grip onto each end of the handlebar. If it is difficult to
slide the grips onto the handlebar, moisten the grips with
warm water first.
14
DECORATION
Proper label application will help to keep the labels
looking their best! When applying labels, keep the
following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle
with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has
been applied to the vehicle.
• After applying a label, rub the label firmly with a clean,
dry cloth to make sure the label is adhered to your vehicle.
Start at the center of a label, and smooth towards the outer
edges to remove air bubbles.
Grip
DASH AND REAR VIEW
15
9
10
TM
R1502b-0920
Advertisement
Table of Contents
