Fisher-Price TRAIL RAIDER R1502 Owner's Manual & Assembly Instructions page 11

Front Tabs
Side Tab
Shifter Handle
8
• Press the tab under the back of the
seat and lift to remove the seat.
• Make sure the motor harness wires are
positioned in the channel to prevent
them from being pinched between the
cowling and vehicle.
• Fit the rectangular opening in the cowling over the
shifter handle.
• Align the front, side and rear tabs on the cowling with the slots
in the vehicle. DO NOT snap the tabs into the slots.
9
• Press firmly on the front of the cowling to snap the four, front
tabs into the slots in the vehicle. Make sure the side and rear
tabs stay aligned with the slots.
Note: Pull up on the front of the front end of the vehicle while
pressing down on the cowling to make sure the front tabs snap
into the slots.
R1502b-0920
ASSEMBLY
Front Tabs
Cowling
Side Tab
Rear Tab
Motor
Harness
PRESS COWLING HERE
To Snap Front Tabs
PULL VEHICLE BODY
UP HERE
To Snap Front Tabs
10
• Press firmly on each side of the cowling to snap the four side
tabs into the slots in the vehicle. Make sure the rear tab stays
aligned with the slot.
PRESS HERE
To Snap Rear Tab
11
• Press firmly on the back of the cowling to snap the rear tab
into the slot in the vehicle.
PRESS HERE
To Snap Side Tabs
R1502b-0920
11