Assembly
Wrench
4
• Completely tighten the lock nut on the rear wheel assembly
with the assembly wrenches.
Hint: An extra wrench has been provided to hold the other lock
nut in place while tightening the lock nut on the other side.
•
You may need the help of another adult to hold the vehicle
while you tighten the lock nut.
Hub Cap
Cover
5
• Fit a hub cap cover onto each rear wheel and push to "snap" in place.
10
ASSEMBLY
Rear Wheel
Ring End
Wheel
Hubcap
7
/
"
16
Washer
Lock Nut
Assembly
Wrench
6
• Remove the protective caps from each front axle and throw
them away.
7
• Slide a
/
" washer onto one of the front axles.
16
• Slide a round bushing, ring end first, onto the front axle.
• Slide a wheel (ribbed side first) onto the front axle.
• Slide a hubcap (indented side out) onto the front axle.
7
• Slide a
/
" washer onto the front axle.
16
3
• Fit a
/
" -16 lock nut on the end of the front axle and tighten
8
with the assembly wrench.
• Repeat this procedure to assemble the remaining
round bushing, wheel, hubcap and
front axle.
Hub Cap Cover
7
• Fit a hub cap cover onto each front wheel and push to
"snap" in place.
Front Axle
7
/
"
16
Washer
Round
Bushing
7
/
" washers,
16
3
/
" -16 lock nut to the other
8
R1502b-0920
R1502b-0920