Specifications - Meridian DSP5200 User Manual

14
DSP5500,

Specifications

DSP5500HC, and
DSP5200C
Connections
• Digital co-axial input and output.
• Meridian BNC Comms input and output.
• RJ45 input and output, providing balanced digital,
Meridian Comms, and power.
Digital formats
• 44.1–96kHz. FIFO locks at 44.1, 48, 88.2, or
96kHz ±150ppm.
• PCM using IEC958, or MHR connection support with
auto-detection.
Signal processing
• 2 x Motorola 56303 running at 80MHz.
• 4 x 24-bit Multi-bit delta-sigma DACs with 128x
oversampling.
• Crossover linear-phase ±30º at 200Hz and 2.6kHz.
Output stages
• Power amplifiers: Complementary bipolar design, with
output-stage error correction and twin loop design.
• Bass: 2 x 75W.
• Mid: 75W.
• Treble: 75W.
Acoustic
• 3 way.
• Ported bass enclosure.
• Isolated mid enclosure.
• Bass drive unit: 2 x 200mm (8") high-efficiency long-
throw custom drivers.
• Mid drive unit: 1 x 160mm (6") custom polypropylene
driver using phase plug.
• Treble drive unit: 1 x 25mm (1") Meridian piston in
short horn, aluminium dome with silver voice-coil.
Characteristics
• Distortion typically <0.01%, or <0.02% up to full
power at all frequencies.
• Noise and hum <-94dBr at all volume settings.
• Acoustic output typically >111dB spl @ 1m.
• Acoustic noise <15dB spl @ 1m.
• Frequency response in room response within 3dB,
28Hz-20kHz.
Cabinet
• Thick MDF side panels sandwiched around steel
plates for maximum damping across all frequencies.
• Steel plates give magnetic shielding.
• Side panels available in black ash and rosewood.
• Separate mid-range enclosure built into main cabinet.
• 8-character display with system lights.
• DSP5500 and DSP5500C: 284mm x 1100mm x
450mm (11.2" x 43.3" x 17.7") (W x H x D).
• DSP5500HC: 1100mm x 285mm x 415mm (43.3"
x 11.2" x 16.3")
(W x H x D).
• 65kg (143lb) each.
Power
• 100-125; 200-250V AC 50-60Hz.
• 20VA standby; 600VA max.
Meridian Audio reserves the right to amend product
specifications at any time.