Table of Contents
Advertisement
３-３ Turning the Power on
Insert the AC adapter plug into the AC adapter jack located on
the rear of the AD-8922A. Plug the AC adapter into an
appropriate electrical outlet.
When connected to the AD-4212C, power can be supplied to
both instruments by plugging the AC adapter into either the
AD-4212C or the AD-8922A.
(Both instruments can have their AC adapter connected at the
same time.)
３-４ Operation
The AD-8922A displays the weighing data transmitted by the weighing instrument used.
The AD-8922A key operations remotely control the weighing instrument.
Available operations depend on the weighing instrument. See Table 2 in "1-2 Applicable Instruments".
３-５ Example of Use
A personal computer is connected to the AD-8922A and the weighing data can be transmitted to the
personal computer, using Windows communication tools (WinCT).
To protect against inadvertent operations, the AD-8922A keys can be disabled. (Function setting
C5et 0").
"
When nothing has been received for two seconds or more, the bar display [- - - - -] appears. By
changing the function setting, the previous data received is displayed until the next data is received
(Hold display). (Function setting "
About details on the settings of the weighing instrument or the external device, see the relevant
instruction manual.
PC/PRINTER
Used to connect to
the external device
Hold 1
")
AD-8922A
External device
AD-8121B
Personal computer
PLC
BALANCE/SCALE
Used to connect to
the weighing instrument
Weighing
instrument
7
Advertisement
Table of Contents
