Setting the Date and Time
Click EDIT >CONFIGURE >DATE/TIME. The dialog below appears.
Figure 14 - Time/Date Configuration Screen
Select the
and
according to your geographical location and time zone by scrolling
REGION
ZONE
with the scroll-bar as necessary and then clicking on the selected value.
Set the
and
by clicking on the Time/Date field and navigating the clock and calendar.
TIME
DATE
Check
to enable automatic updates using the Network Time Protocol
Automatic Updates
Refer to Network Time Protocol on page 87.
(NTP).
Note: A System Restart is required for a Time Zone change to take effect
MAXX-1200 Owner's Manual
Page 55