Video Controls - Meridian 800 User Manual

USING THE 800 PREFACE
REFERENCE DVD/CD
PLAYER
The vertical
position controls will not
work with some projectors.
Display
X=, Y=
Film
Black*
Contrast*
Colour*
Hue*

Video controls

The 800 Reference DVD/CD Player includes several video controls to allow
you to adjust the video image. The video controls are available for video
sources, and the picture position controls are also available for the internal
DVD.
Note: The menus do not appear unless you have a locked video input.
To display the video controls
• Press the red key on the remote.
•
If you have reprogrammed the remote you may need to press Function
DVD fi rst.
The display shows the fi rst video control; horizontal and vertical picture
position.
For example:
• Press or to change the horizontal picture position, and
< >
change the vertical picture position.
Each control can be varied between -30 and 30.
• Press Video or the red
next video control.
The following table shows the full list of video controls:
Description
Horizontal and vertical picture position.
Film mode detection setting†.
Black level.
Picture contrast.
Picture colour.
Picture hue (NTSC inputs only).
*Only for external video sources.
†Normally turned on. Should only be turned off if advised by technical
support. 30fps setting may be useful for some older NTSC fi lm material.
key on the remote to show the
•
19
X= 0 Y= 0
or to
A V