Sharp AR-M550N Printer Operation Manual page 22

SELECTING PRINTING FUNCTIONS Settings in the [Advanced] tab (continued)
Paper Selection
1
When [Paper Source] is selected, the specified
paper tray will be used for printing. When [Paper
Type] is selected, the tray that has tabbed paper
will be used for printing.
Default setting: Paper Source
Use tab papers by sets
2
When multiple sets of tabbed paper will be used for
a print job, the tabbed sheets to be used must
normally be calculated and placed in the bypass
tray or tray 3.
However, when this setting is selected, it is not
necessary to calculate the sheets to be used.
For example, if one set of tabbed paper consists of
5 sheets and insertion of 8 tabbed sheets at
specific pages of the print job is selected in [Page]
below, 2 tabbed sheets will be left over after the
first set of copies of the print job is printed. These
two sheets will then be ejected so that insertion in
the next set of copies begins from the first tabbed
sheet of the next set of tabbed sheets.
Default setting: Not selected
Text Settings
3
This field is used to enter the text to be printed on
the tabs and the pages at which tabbed sheets are
to be inserted.
[Text Alignment]
This is used to set the alignment of the text on the
tabs. Select [Left], [Center], or [Right].
Default setting: Center
[Page]
Enter the page numbers where tabbed sheets are
to be inserted. Separate each page number by a
comma. Use a hyphen to specify continuous
pages.
Example: 1,2,3,5-10
[Font]
Click this button to select font settings.
[Text]
Enter the text to be printed on the tabs. Up to 50
characters can be entered.
[Rotate 180 degrees]
Select this checkbox to rotate the text on the tabs
180 degrees.
Example:
Rotate 180 degrees
[Information]
4
Shows the settings selected in [Text Settings].
[Add]
Click this button to add the settings in [Text
Settings] to [Information].
[Delete]
Click this button to delete a selected setting from
[Information].
[Update]
If you make any changes to the settings that
appear in [Information], click this button to update
[Information].
2-12
Rotate 180 degrees