Precautions On Viewing Stereoscopic 3D Images - Sharp PG-D2710X Operation Manual

Precautions on viewing stereoscopic 3D images

Before viewing stereoscopic 3D images, please read this section carefully.
WARNING
■
Under normal conditions, viewing stereoscopic 3D images is safe for any duration that you
would normally view your screen. However, some people may experience discomfort. The
following precautions are recommended to minimize the potential for experiencing visual
problems or any adverse symptoms.
■
Take regular breaks, at least 5 to 15 minutes after every 30 to 60 minutes of stereoscopic
3D viewing.
* Based on the guidelines issued by the 3D Consortium revised December 10, 2008.
■
Maintain an appropriate distance from the screen. Viewing from too close a distance can
strain your eyes. If you experience eye strain, immediately discontinue viewing.
If you experience any of the following symptoms during viewing:
– nausea
– queasiness/dizziness
– headache
– blurry vision or double vision that lasts longer than few seconds
Do not engage in any potentially hazardous activity for example, driving a vehicle until
your symptoms have completely gone away.
If symptoms persist, discontinue use and do not resume stereoscopic 3D viewing without
discussing your symptoms with a physician.
As you get more comfortable viewing stereoscopic 3D:
• Adjust the parallax on the 3D-video playback equipment. (You may not be able to adjust the
parallax on some models of equipment.)
• Adjust the projected image to the most comfortable viewing size by zooming.
(Projecting images on the smallest or largest screen size possible may eliminate the
stereoscopic effect and strain your eyes.)
®
• Use the DLP Link™ Invert function to properly set the video for your left and right eyes. (For
details on using DLP
manual.)
®
Link™ Invert , see the section on its operation in this operation
2