Sharp MD-SR70H Operation Manual page 30

To change disc names or track
names
Some MiniDiscs created on other equip-
ment may have more than 100 characters
in a track name or disc name. The charac-
ters from the 101st character and on can-
not be corrected or changed.
To delete characters:
1
Put the unit in the character input mode.
To delete characters in a disc name,
perform steps 1 - 2 in the "Disc name"
section (page 27).
To delete characters in a track name,
perform steps 1 - 3 on page 28.
2
Press the VOL + or VOL – button to
move the cursor to the character you
want to delete.
3
Press the BASS button.
The character will be erased.
4
Press the EDIT button.
To add characters:
1
Put the unit in the character input mode.
To add characters to a disc name, per-
form steps 1 - 2 in the "Disc name"
section (page 27).
To add characters to a track name,
perform steps 1 - 3 on page 28.
2
Press the VOL + or VOL – button to
move the cursor to the right of the char-
acter, where you want to add a new char-
acter.
3
Perform steps 3 - 5 in the "Disc name"
section (pages 27 - 28).
4
Press the EDIT button.
Name/stamp
Master MiniDisc
(Prerecorded MiniDisc)
1. The sound is recorded.
2. The character information, such
as the disc name and track
names is transferred.
1
Record the sound from the master
MiniDisc onto a recordable MiniDisc.
Playback unit
The sound
is recorded.
Master
MiniDisc
Refer to the standard recording
method (pages 7 - 13).
At this point, only the sound is re-
corded. No character information is
transferred.
Check whether the total number of
tracks on the newly recorded MiniDisc
matches the total number of tracks on
the master MiniDisc. If they do not
match each other, combine or divide
tracks using the edit operation (pages
26 - 27).
This function can not be performed
from playback only MiniDiscs.
E-29
Recordable
MiniDisc
Recording unit
Recordable
MiniDisc