Table of Contents
Advertisement
Troubleshooting chart
SD-AS10W
ENGLISH
Many potential problems can be resolved by the owner without calling a service tech-
nician.
If something is wrong with this product, check the following before calling your
authorised SHARP dealer or service centre.
" General
Symptom
! Is the unit unplugged?
The power is not turned on.
! Is the system cable connected?
! Is the volume level set to "0"?
No sound is heard.
! Are the headphones connected?
! Are the speaker wires disconnect-
! Are the speaker wires connected to
The sounds from speakers
are not well balanced.
! Move the unit away from any com-
Noise is heard during play-
back.
! Set this unit to the power stand-by
When a button is pressed,
the unit does not respond.
! Is the unit placed near TV with inter-
Interference or noise occurs
on the TV image.
! Did you remove the plug from the
Timer playback does not
start.
! Is the display in the dimmer mode?
The display on the unit is
dark.
! Is TV turned on?
No images are displayed.
! Is the TV input switched on?
E-59
Possible cause
Reference
page
P. 17
P. 14
P. 19
P. 57
P. 15
ed?
P. 15
the wrong channels?
puters or mobile phones.
P. 60
mode and then turn it back on. If the
unit still malfunctions, reset it.
P. 14
nal aerial? Use an external aerial.
P. 20, 50
AC socket, or did a power failure oc-
cur? Reset the clock and timer.
P. 19
P. 53
P. 53
" DVD/CD player
Symptom
Possible cause
! Is the disc very dirty?
Playback sounds are
skipped.
! Does the disc satisfy the standards?
! Is the unit located near excessive vi-
brations?
! Has condensation formed inside the
unit?
! Is the disc very dirty?
The control buttons do not
function. Music or video play-
! Does the disc satisfy the standards?
back is interrupted.
! Is the unit located near excessive vi-
brations?
! Has condensation formed inside the
unit?
! Is the disc very dirty?
Pictures and sound are
skipped.
! Is the unit located near excessive vi-
brations?
! Has condensation formed inside the
unit?
! Is a disc other than a DVD (region
The system does not operate
even if the power is on.
number 2, 3, 4 or ALL), SVCD, VCD,
audio CD, MP3, WMA or JPEG load-
ed?
! Are the video and audio cables con-
Image cannot be played
back. (Sound is not heard.)
nected improperly?
! Is a disc other than a DVD (region
number 2, 3, 4 or ALL), SVCD, VCD,
audio CD, MP3, WMA or JPEG load-
ed?
! Is the disc very dirty?
! Is the disc loaded with the label side
toward you?
! Is the TV input set to "VIDEO 1/VID-
EO 2" etc.?
! Is the unit turned on?
05/3/18
SD-AS10W_EX_E.fm
Reference
page
P. 60
P. 60
P. 60
P. 5
P. 16, 55,
56
P. 5
P. 22
P. 53
P. 18
TINSZA124AWZZ
Advertisement
Table of Contents
