Table of Contents
Advertisement
To interrupt playback
Set the MODE 1/MODE 2 switch to MODE 1 and press the
control.
To resume playback from the same point, press the
To stop playback
DVD:
Press the
(STOP) button twice.
SVCD/VCD/Audio CD/MP3/WMA/JPEG:
Press the
(STOP) button.
Notes:
! Some DVD discs may not function as described in the manual. See the disc jacket
for restrictions.
! During an operation, " " or " " may appear indicating that the operation is dis-
abled by the disc.
! Some DVD-R/DVD-RW/CD-R/CD-RW may not play properly due to the status of
the disc or equipment used for recording. Change the recording speed or disc. For
more details, see the manual for the equipment.
! When you turn on the power or switch the input to "DVD", initialisation starts and
operation is not possible for a few seconds.
! Sound may skip at high volume depending on the disc. In this case, turn down the
volume.
! On dual layer DVD discs, playback may pause when the layer switches.
" To resume playback after stopping
(resume play)
You can resume playback from the point where it was stopped.
1
Whilst a disc is playing, press the
button.
The system stores the point.
2
To restart play, press the
(PLAY) button.
Playback resumes from the point.
To cancel resume play:
Press the
(STOP) button twice.
Notes:
! The resume playback feature is disabled on some discs.
! Depending on the disc, playback may resume from slightly before the stopped
position.
" To exchange other discs whilst playing a
button on the remote
(PLAY) button.
1
2
3 Replace a disc.
4
Changing the progressive scan mode
When connecting to a progressive scan TV with a component video cable, you can
enjoy images with less flickers. (Set the progressive scan mode to "PROGRESSIVE
ON".)
1
2
3
When "PROGRESSIVE ON" is selected for a non-progressive scan TV, images do
not appear. Select "PROGRESSIVE OFF".
What is progressive scanning?
The conventional TV system displays 30 frames of still images per second to per-
form a series of movements (interlaced scanning). Whereas, progressive scanning
displays one frame every 1/60th of a second (60 frames per second) to ensure less
flickers and high-density images.
(STOP)
PRESS PLAY TO CONTINUE
Cooling fan
This amplifier unit is fitted with a cooling fan at the
DVD
VideoCD
CD
rear for improved cooling. Please do not cover the
opening of the fan with any obstacles, as this will
Audio Visual
Entertainment
block proper ventilation.
Caution:
! The amplifier unit will get warm whilst being used. Do not touch the warm areas of
! This amplifier unit contains an automatic protection circuit, which protects the am-
disc
Press a disc number select button (except for the disc in operation).
Within 10 seconds, press the OPEN/CLOSE button.
Press the OPEN/CLOSE button to close the disc compartment.
Press the ON/STAND-BY button to turn the power on.
After playing a disc, enter the stop mode.
In resume play, the progressive scan mode cannot be changed.
Set the MODE 1/MODE 2 switch to MODE 2 and press the PROGRESSIVE but-
ton repeatedly to select "PROGRESSIVE ON".
Each time this button is pressed, the mode changes in the following order:
L
the amplifier unit for prolonged periods to avoid damage to you.
plifier unit from being damaged. All speaker outputs are muted when this circuit is
activated. Should the unit stop operating, first check the speaker terminals for
shorted wires, then press the ON/STAND-BY button to turn on the main unit.
05/3/18
SD-AS10W_EX_E.fm
SD-AS10W
ENGLISH
Progressive scan
mode indicator
C
R
Cooling fan
E-24
TINSZA124AWZZ
E
F
S
V
I
N
P
E
Advertisement
Table of Contents
