Standard Message Stamp - Savin 2045e Operating Instructions Manual

Other Transmission Features
The selected original position and
page opening orientation are
shown above the highlighted [2
Sided Original].
Note
r To cancel this mode, press [Can-
cel]. The display returns to that
of step
r Select [2 Sided from 1st Page] to
send a two-sided original from
the first page.
r Select [1 Sided for 1st Page] if you
want to send a cover letter as the
4
first page.
G
Press [OK].
H
Specify the destination, and then
press the {Start} key.

Standard Message Stamp

Use this function to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: "Confidential", "Urgent",
"Please phone", and "Copy to corres.
section"
You can also program other messag-
es.
Note
r While this function is in use, the
third line of the Label Insertion is
not printed. See p.76 "Program-
ming the Label Insertion".
r When there is an image around the
area where the standard message
is to be stamped, that image is de-
leted.
r To program a standard message,
use the Program/Change/Delete
Standard Message function. See
p.149 "Programming, Changing,
and Deleting Standard Messages".
64
C
.
A
Place the originals, and the select
the scan settings you require.
Reference
p.15 "Placing Originals", Fac-
simile Reference <Basic Features>
p.33 "Scan Settings", Facsimile
Reference <Basic Features>
B
Press [Sub TX Mode].
C
Press [Std. Message].
D
Select the standard message to be
stamped, and then press [OK].
The selected standard message is
shown above the highlighted [Std.
Message].
Note
r To cancel the selection, press
[Cancel]. The display returns to
C
that of step .
r Programmed standard messag-
es are shown in the keys.
r The machine cannot stamp mul-
tiple standard messages.
E
Press [OK].