Specifying A Destination; Entering A Fax Number - Savin 2018 Operating Instructions Manual

Kir-C2-ENcombine_F_FM.book Page 33 Friday, September 19, 2003 3:00 PM

Specifying a Destination

You can specify the destination using
one of three methods.
❖ ❖ ❖ ❖ Fax number
p.33 "Entering a Fax Number"
❖ ❖ ❖ ❖ E-mail address
p.35 "Entering an E-mail Address"
❖ ❖ ❖ ❖ Destination list
p.35 "Using the Destination List"
This section covers these functions
and others in more detail.
Note
❒ The display shows the percentage
of free memory space for storing
originals. Since fax numbers and e-
mail addresses are programmed in
separate memory, dialing fax
numbers using the number keys
does not change the percentage on
the display.
Specifying a Destination

Entering a Fax Number

Enter numbers directly using the key
pad on the right side of the control
panel.
Note
❒ Maximum length of a fax number:
128 digits.
❒ You can insert pauses and tones in
a fax number. See p.34 "Pause",
p.34 "Tone".
A A A A
Make sure that is displayed in
the destination display column.
Note
❒ If it is not displayed, press
[ ].
B B B B
Enter the fax number using the
number keys.
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key, and then enter
again.
2
33