Storing Registrations - Roland Atelier AT-90SL Owner's Manual

Chapter 3 Using the Registration Buttons
Procedure for Creating Registration Sets
You can change voice and other panel settings by pressing the Registration
buttons during performance of songs.
Prepare the Registrations
A convenient way to make the sequence of Registration buttons to be
pressed easy to understand is to store the panel settings starting from the
Registration [1] button, continuing with subsequent buttons in accordance
with the progression of the song.
Save the Registrations to the floppy disk
If you want to use more than twelve Registrations in a song, save the
settings for Registration buttons [1]–[12] to a floppy disk as a set, then
continue to store further panel settings again, starting from Registration
button [1]. Save all of the Registration sets you have set to the floppy disk.
Arrange the Registrations in the sequence they are to be used
Save the Registration sets to the floppy disk in the order they are to be used
in the song. You can use the Disk Edit function (p. 110) to alter the sequence
and names of rhythms contained on the floppy disk (p. 94) as well as delete
such rhythms (p. 108).
Using Registration Sets
Call up the Registration sets saved on the floppy disk to the AT-90SL
Insert the floppy disk containing the saved Registration sets into the disk
drive, and read the Registration sets into the AT-90SL.
Switch the Registration sets as you perform
Press the Registration buttons to switch Registrations as you play the song.
To call up the next Registration Set, press the [Load Next] button, then press
the Registration buttons.

Storing Registrations

fig.03-02
Write
1.
Make all the panel settings that you wish to store.
2.
While holding down the [Write] button, press one of the
Registration buttons [1]–[12].
The panel settings will be stored in the selected Registration button.
90
1 2
Manual
3 4 5
You can also assign the
"Right + Load Next" to the
foot switch and use it to
call up subsequent
Registration sets (p. 119).
6
For details on the settings
that are stored in a
Registration, refer to
"Settings That Are Stored
After the Power Is Turned
Off" (p. 250).