Silencing A Specific Track (Track Mute) - Roland Atelier AT-90SL Owner's Manual

Chapter 7 Recording/Playing Back What You Play
Silencing a Specific Track
(Track Mute)
When the Rec/Play screen is displayed, the track button will
light to indicate a track in which a performance has been
recorded. By turning off these track buttons, you can
temporarily silence the sound. This is referred to as "Track
Mute."
1.
Insert the floppy disk containing the performance
data into the disk drive.
2.
Press the [Song] button.
The Song Select screen appears.
fig.07-31_50
3.
Touch < >< > to select the song that you
wish to play back.
4.
Touch <Load> to load the song.
The Rec/Play screen appears.
fig.07-04_50
All accompaniment data is grouped to the "Accmp" track
button in the Rec/Play screen. In the same manner, the
rhythm performance data is grouped to "Rhythm."
If you want to mute only a portion of the rhythms or
accompaniment, open up the Track Mute screen, and switch
off the Track Mute buttons there (p. 149).
148
Max Max Max Max
Min Min Min Min
5.
Press a track button that is lit, extinguishing the
button.
When you play back the performance, track buttons that
are not lighted will be muted (silenced).
fig.07-14
6.
Press the track button once again (button lights).
The part that had been muted will return to normal and
will be heard.
Correspondence Between Track Buttons and
Track Mute Buttons When Playing Back
Commercial SMF Music Files
Track button
Rhythm 10
Accmp 5, 6, 7, 8, 9, 11, 12, 13, 14, 15, 16
Bass 2
Lower 3
Upper 4
Solo 1
Correspondence Between Track Buttons and
Track Mute Buttons When Playing Back
Performance Data Created with an Music
Atelier
Track button
10, 11 (Drums/SFX),
Rhythm
13 (Manual Percussion)
Accmp 5, 6, 7, 8, 9, 12, 14, 15
Bass 2 (Bass)
Lower 3 (Lower)
Upper 4 (Upper)
Solo 1 (Solo)
Harmony Intelligence
Channel
Track Mute button