Command Summary; Command Descriptions - Siemens 2000592-001 User Manual

Command Descriptions

Description
Unique Commands
2000592-001
Chapter 3

Command Summary

This chapter is intended for maintenance personnel.
This chapter provides definitions for all of the commands you will be
using for setup purposes or for performing test diagnostics.
These are the commands that are unique to the ANCB.
config address ip
ipaddr
config address
ethernet eaddr
config display
config netmask
xxx.xxx.xxx.xxx
config iproute
routeaddr
display links
hdlc setuptime
hdlc window
download
list
list nnn
list nnn, xxx
list on
list clear
login password
login password
remoteaddr
Set the ANCB IP address.
Set the ANCB Ethernet hardware address.
Display the current ANCB non-volatile
parameters.
Set the ANCB IP subnetwork.
Set the default router IP address.
Display link state table.
Display and/or change the hdlc setuptime in
microseconds.
Display and/or change the hdlc window.
Download new software via Configuration
port.
List next 22 log events.
List 22 events, starting with number nnn.
List xxx events, starting with number nnn.
Continuously list events from the log buffer,
as they are added (terminate by pressing any
key).
Clear all events from log buffer.
Log in to device via Configuration port.
Log in to remove device (ANCB or HUB).
Command Summary • 35