Siemens 2000592-001 User Manual page 18

Site Wiring Requirements,
DataNET Channels
Table 1-1:
Recommended DataNET
Cable
8 • Installation
Continued
The DataNET channel connections can be either copper wire or fiber
optic cable. The wiring method and cable type for DataNET is dependent
upon the site requirements. For cable requirements see Table 1-1.
The following Table should be used when evaluating or selecting cable
for an existing or new DataNET installation.
Cable Type
Fiber Optic
MM 62.5/125; 2 Fiber
Conductors
2- Conductor Copper
Wire
4-Conductor Copper
Wire
Vendors & P/N
SEA P/N 1270002-002
Industry Available from
Multiple Vendors
SEA P/N 1686002-001
Belden P/N 9182
For
Belden Armored Cable
order
SEA P/N 1680000-002
SEA P/N 1681000-003
Belden P/N SSD1743
Installation Notes
New Installation as
an alternative to
copper cable
Max distance from
Analyzer to ANG or
between Hubs
1520 meters (5000
ft)
Recommended for
Single Channel
Max distance from
Analyzer to ANG or
between Hubs
1520 meters (5000
ft)
Recommended for
Dual Channel
Max distance from
Analyzer to ANG or
between Hubs
1520 meters (5000
ft)
2000592-001