What You Need; Before You Begin - Seagate Medalist Pro 2160N Installation Manual

Medalist Pro 2160N, Rev. B

What you need

•
Straight-edge and Phillips screwdrivers
•
Drive mounting screws
•
A SCSI interface host adapter
•
A 50-pin SCSI interface cable
•
An unused drive power cable for your new drive
•
A DOS or Windows 95 system setup diskette (Seagate recom-
mends using DOS Version 5.0 or later).
•
If you are mounting this 3.5-inch drive in a 5.25-inch drive bay,
you need a mounting adapter or frame kit. Also, you may need
drive mounting rails if your drive bay is not designed for direct
mounting.

Before you begin

•
Make sure your computer is turned off before you open the
case.
•
Read the handling precautions following and inspect the drive
to make sure that it is not damaged.
•
Save your foam-lined Seagate disc drive box. This box has
been approved by Seagate for shipping a Seagate disc drive.
Using any other container or packing material voids your drive
warranty.
1