Seagate Medalist Pro 2160N Installation Manual page 13

Medalist Pro 2160N, Rev. B
Figure 5. Mounting screws
3. Slide the drive carefully into the drive bay. Secure the drive
with four 6-32 UNC-2A mounting screws in either the side-
mounting holes or the bottom-mounting holes. Do not over-
tighten the screws. They should be inserted no more than six
full turns into the drive frame. Do not use metric screws.
Caution. To avoid possible damage to the drive, do not
!
overtighten the screws or use metric screws.
9