Seagate Medalist Pro 2160N Installation Manual page 17

Medalist Pro 2160N, Rev. B
3. If you have two hard drives installed, the FDISK menu dis-
plays five options. Option five allows you to select the drive
you want to partition. Make sure that your new drive is
selected. If you accidently repartition your old hard drive, you-
will erase all data on the drive.
4. Select "Create DOS partition or logical DOS drive" by press-
ing 1. Then press
ENTER
5. Select "Create primary DOS partition" by pressing 1 again.
Then press . Create your first drive partition. If you are
ENTER
creating a partition that will be used to boot your computer
(drive C), make sure the partition is marked active.
6. Create an extended partition and additional logical drives, as
necessary, until all the space on your new hard drive has
been partitioned.
7. When partitioning is complete, FDISK reboots your computer.
Drive formatting
Caution. Make sure to use the correct drive letters so
!
that you do not format a drive that already contains
data.
At the A: prompt, type format x :, where x is the letter of your
new partition. If this is your boot drive, type format x : /s. Repeat
the format process for all the new partitions you have created.
After you format your drive, it is ready to use.
.
You're Done!
13