Installation/Connections Overview - LG Zenith HCS5610 Installation And Operating Manual

Installation/Connections Overview

To hook up source equipment, see below and also refer to the Table of
Contents on page 5; shows pages to go to for equipment hookup options.
M.P.I Interface
Cable In
HCS5610 front panel controls and LED functions
A POWER LED
The POWER LED illuminates while the display panel is on.
The LED is off when the display panel is off.
STATUS LED
B
The STATUS LED flashes while the program is running.
RESET
C
Press RESET to start the program that re-initializes the HCS5610.
UPDATE
D
Press UPDATE to allow software to be updated. To start the download program,
press and release the RESET button while holding down the UPDATE button.
AUDIO IN
REMOTE
IN
RJP
INTERFACE
1 2
AUX
DIGITAL
CONTROL
VIDEO IN
Remote In
Audio In
AUDIO IN
REMOTE
IN
RJP
INTERFACE
1
AUX
DIGITAL
CONTROL
VIDEO IN
RJP Interface
Digital Video 1, 2 In
AUX Control
POWER RESET
STATUS UPDATE
AC OUT AC IN
AUDIO OUT RS-232C
DIGITAL DIGITAL AUDIO DISPLAY
MAX 8A 960W AC 120V~ 60Hz
VIDEO OUT OUT (OPTICAL) CONTROL
Audio Out
RS-232C Port
AUDIO OUT
2
DIGITAL DIGITAL AUDIO
VIDEO OUT OUT (OPTICAL)
Digital
Audio Out (Optical)
Digital Video Out Display Control
A
B
AC Out
AC OUT AC IN
RS-232C
DISPLAY
MAX 8A 960W AC 120V~ 60Hz
CONTROL
AC In
POWER RESET
STATUS UPDATE
P A G E 7
C
D