USING THE MONITOR
Connecting to a PC
Your Monitor supports the Plug & Play* feature.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
NOTE
It is recommended to use the Monitor with
y
the HDMI connection for the best image
quality.
Use a shielded signal interface cable, such
y
as D-sub 15 pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
If you turn the Monitor on when the set
y
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
y
on the screen. This is normal.
USING THE MONITOR SET
CAUTION
y
Do not press the screen with your finger for
y
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
y
for a long period of time to prevent image
burn. Use a screensaver if possible.
15
Connect the
signal input cable
and tighten it by
turning the screws
clockwise.