LG 47WS50MS Owner's Manual
Monitor signage
Hide thumbs
Also See for 47WS50MS:
- Owner's manual (86 pages) ,
- Owner's manual (89 pages) ,
- Owner's manual (90 pages)
Related Manuals for LG 47WS50MS
Summary of Contents for LG 47WS50MS
- Page 1 OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 42WS50BS 42WS50MS 47WS50BS 47WS50MS 55WS50BS 55WS50MS www.lg.com...
- Page 2 TABLE OF CONTENTS CONTENTS LICENSES ENTERTAINMENT - Connecting to a wired network - Network Status ASSEMBLING AND - Connecting USB storage devices PREPARING - Browsing files Accessories - Viewing movies Optional Accessories - Viewing photos Parts and buttons - Listening to music Using the Mounting Cable Tie - Viewing the Contents List Connecting the Speakers...
- Page 3 TABLE OF CONTENTS - DVI Cable TROUBLESHOOTING SPECIFICATIONS IR CODES CONTROLLING THE MULTIPLE PRODUCT Connecting the cable RS-232C Configurations Communication Parameter Command Reference List Transmission / Receiving Protocol...
- Page 4 LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
- Page 5 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
- Page 6 ASSEMBLING AND PREPARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. ST-200T SP-2000 Cable holder/...
- Page 7 ASSEMBLING AND PREPARING Parts and buttons Screen Buttons/ Screen Marks Connection panel Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Adjust the up and down. Adjusts the volume level. AUTO/SET Displays the current signal and mode.
- Page 8 ASSEMBLING AND PREPARING Using the Mounting Cable Connecting the Speakers - Only on some models. First, connect the input signal cable to be used. Connect an input signal cable to use before Insert the cable tie into the bottom hole on the installing the speakers.
- Page 9 ASSEMBLING AND PREPARING Connecting the stand Using the IR Receiver - Only on some models. This allows a remote control sensor to be placed Place a soft cloth on the table and put the in a custom location. Then that display can control product with the screen facing downward.
- Page 10 ASSEMBLING AND PREPARING Using the Kensington Portrait Layout security system The Kensington security system connector is To install in portrait mode, rotate the set located at the back of the Monitor. For more counterclockwise 90 degrees when looking at from information of installation and using, refer to the the front.
- Page 11 ASSEMBLING AND PREPARING Connecting the Media Player Attach the Media Player on the product using the four screws provided. Place a soft cloth on the table and put the product with the screen facing downward. Push the Media Player into the compartment to mount it.
- Page 12 For more information, refer to the instructions supplied with the wall mount. If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. VESA compatible. Please use VESA standard as below.
- Page 13 ASSEMBLING AND PREPARING Securing the product to a wall (optional) WARNING (Depending on model) If a product is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: »...
- Page 14 REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching ends to the label inside the compartment, and close the battery cover.
- Page 15 REMOTE CONTROL MENU (See p.42) Accesses the main menus or saves your input and exit menus. AUTO Automatically adjusts picture position and minimizes image instability.(RGB input only) Navigation buttons Scrolls through menus or options. S.MENU (SuperSign Menu Key) Selects menus or options and Selects the SuperSign OSD confirms your input.
- Page 16 USING THE MONITOR USING THE MONITOR Connecting to a PC CAUTION Your Monitor supports the Plug & Play* feature. Connect the signal input cable * Plug & Play: This is the function that allows a PC and tighten it by to use the monitor without installing a driver.
- Page 17 USING THE MONITOR RGB connection DVI-D connection Transmits the analog video signal from your PC to Transmits the digital video signal from your PC to the Monitor. Connect the PC and the Monitor the Monitor. Connect the PC and the Monitor set with the 15 pin signal cable as shown the set with the DVI cable as shown the following following illustrations.
- Page 18 USING THE MONITOR HDMI connection Display Port connection Transmits the digital video and audio signals from Transmits the digital video and audio signals from your PC to the Monitor. Connect the PC and the your PC to the Monitor. Connect the PC and the Monitor with the HDMI cable as shown in the Monitor with the Display Port cable as shown in following illustrations.
- Page 19 USING THE MONITOR IR Receiver connection Allows the use of a wired remote or IR receiver extension. NOTE Make sure the power cable is disconnected.
- Page 20 USING THE MONITOR Adjusting the screen Customizing image options Customize basic and advanced options of each Selecting an image mode image mode for the best screen performance. Display images in its optimized settings by Press MENU to access the main menus. selecting one of the preset image modes.
- Page 21 USING THE MONITOR Adjusting the sound Customizing PC display options Customize options of each image mode for the Selecting an sound mode best image quality. This Monitor has 5 preset sound modes to This function works in the following mode: compliment different types of video content.
- Page 22 If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. Option Description Infinite LG's Infinity Sound option provides 5.1 Sound channel stereo quality sound from two speakers. Treble Increases the intensity of the high NOTE frequency part of audio.
- Page 23 USING THE MONITOR 16:9 : This selection will allow you to adjust the : This selection will allow you to view a picture horizontally, in linear proportion, to fill the picture with an original 4:3 aspect ratio, black entire screen(useful for viewing 4:3 formatted bars will appear on both the left and right of the DVDs).
- Page 24 USING THE MONITOR Using the input list Selecting an input source Press INPUT to access the input source list. - The connected device displays on each input source. Press the Navigation buttons to scroll to one of the input sources and press OK. Input source Description AV(CVBS)
- Page 25 ENTERTAINMENT ENTERTAINMENT Connecting to a wired network To set up the network seetings: (Even if your dis- play has already connected automatically, running setup again will not harm anything), (Depending on model) Press MENU to access the main menus. Connect the display to a local area network (LAN) Press the Navigation buttons to scroll to NET- via the LAN port as shown on the following illustra-...
- Page 26 For details, contact your ISP. Press MENU to access the main menus. LG is not responsible for any malfunction of the NET- Press the Navigation buttons to scroll to...
- Page 27 ENTERTAINMENT Connecting USB storage devices Tips for using USB storage devices Only a USB storage device is recognizable. You can connect USB storage devices such as If the USB storage device is connected a USB flash memory, external hard drive to the through a USB hub, the device is not recog- display and use multimedia features .
- Page 28 ENTERTAINMENT If the USB HDD does not have an external Browsing files power source, the USB device may not be detected. So be sure to connect the external Access the photo, music, or movie lists and browse files. power source. - Please use a power adaptor for an external Connect a USB storage device.
- Page 29 ENTERTAINMENT File Item Profile Supported File Formats Extensions Photo JPEG supported y SOF0: file format baseline Type Supported file format y SOF1: Movie DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T Extend RP,TP,ASF,WMV,FLV) Sequential y SOF2: Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. Progressive mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. Photo size y Min: 64 x 64 avi(motion-jpeg)/*. y Max Type: mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting 1366 x 768...
- Page 30 ENTERTAINMENT Control playback by using the following buttons. Page 1/1 Movie List Drive1 Page 1/1 USB1 USB Drive Move Play Page Change Mark 01:02:30 / 02:30:25 Option Hide Exit Change Numbers Mark Mode Exit To Photo list Page 1/1 Movie List Mark Mode Drive1 Page 1/1...
- Page 31 ENTERTAINMENT Tips for using playing video files When you are watching the movie by Movie List function, you can adjust an image by Some user-created subtitles may not work Energy Saving key on the remote control. properly. User setup for each image mode does not Some special characters are not supported operate.
- Page 32 ENTERTAINMENT When you select the Set Video Play,, Code Page Support Language Latin1 English, Spanish, French, Press the Navigation buttons to scroll to show German, Italian, Swedish, Finnish, the Picture Size, Audio Language, Subtitle Dutch, Portuguese, Danish, Roma- Language or Repeat. nian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan,Valencian Press the Navigation buttons to scroll to make...
- Page 33 ENTERTAINMENT When you select the Set Video,, Page 1/1 Photo List USB1 USB Drive Drive1 Page 1/1 Press the Navigation buttons to scroll to make appropriate adjustments. When you select the Set Audio,, Move View Page Change Mark Change Numbers Exit To Music List Mark Mode...
- Page 34 ENTERTAINMENT Using photo options Press the ENERGY SAVING button ENER- repeatedly to change the brightness of GY SAVING your screen. Use the following options while viewing photos. Slide Speed: Selects a slideshow Option speed (Fast, Medium, Slow). TransitionEffect: Set the view mode of the slideshow.
- Page 35 ENTERTAINMENT When you select the Set Photo View, Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM. Press the Navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding Pushes the current slide out of view as it plays to the next slide. Stairs Pushes the current slide in a staircase shape as it plays to the next slide.
- Page 36 ENTERTAINMENT Listening to music When you select the Video, Press the Navigation buttons to scroll to make appropriate adjustments. Press the Navigation buttons to scroll to My Me- and press OK. Press the Navigation buttons to scroll to Music When you select the Set Audio, List and press OK.
- Page 37 ENTERTAINMENT Tips for playing music files Control playback by using the following buttons. This unit doesn't support the ID3 Tag embedded MP3 files. Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 NOTE 004. - B04.mp3 005. - B05.mp3 006.
- Page 38 ENTERTAINMENT Viewing the Contents List Music options Plays back the stored files using the Export option in SuperSign Manager. Press MENU to access the Pop-Up menus. Press the Navigation buttons to scroll to Set Au- Press the Navigation buttons to scroll to Media and press OK.
- Page 39 ENTERTAINMENT DivX® VOD Guide DivX® VOD Registration NOTE In order to play purchased or rented DivX® VOD contents, you should register your device with 10 While you are checking the registration code, digit DivX registration code from your device at some buttons may not work.
- Page 40 ENTERTAINMENT Using PIP/PBP DivX® VOD Deregistration You should deregister your device with 8 digit DivX Videos or pictures stored on the USB device can deregistration code from your device at www.divx. be displayed on a single monitor by dividing them com/vod.
- Page 41 ENTERTAINMENT Select a file you want and then press OK. For sound select either Main or Sub. You must to select the output sound before running the PIP or PBP function. Page 1/1 Movie List Drive1 Page 1/1 USB1 USB Drive 051.
- Page 42 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing Main Menus MARK BRIGHT NESS Press MENU to access the main menus. MUTE AUTO S.MENU MENU Press the Navigation buttons to scroll to one of the following menus and press OK. BACK EXIT TILE Press the Navigation buttons to scroll to the setting or option you want and press OK.
- Page 43 CUSTOMIZING SETTINGS PICTURE settings PICTURE Move Aspect Ratio : 16:9 Press MENU to access the main menus. Energy Saving : Off Press the Navigation buttons to scroll to PICTURE : Off Easy Brightness Control Smart Energy Saving : Off press OK. Picture Mode : Standard Press the Navigation buttons to scroll to the setting or...
- Page 44 CUSTOMIZING SETTINGS Setting Description Picture Mode Selects one of the preset image or customizes options in each mode for the best Monitor screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the Monitor . Mode Vivid Adjusts the video image for the retail environment by enhancing the contrast,...
- Page 45 CUSTOMIZING SETTINGS Advanced Control Setting Description Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen. (Off/High/Medium/Low) The picture is improved by making bright parts brighter and dark parts darker. (Function works in the following mode - AV(CVBS), Component, HDMI-DTV, DVI-DTV, Display Port-DTV) Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer.
- Page 46 Setting Description Infinite Sound LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers. Treble Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range.
- Page 47 CUSTOMIZING SETTINGS TIME settings TIME Move Clock Press MENU to access the main menus. Off Time : Off Press the Navigation buttons to scroll to TIME and press On Time : Off Sleep Timer : Off Power On Delay : Off Press the Navigation buttons to scroll to the setting or option Auto Off : 15 min.
- Page 48 CUSTOMIZING SETTINGS OPTION settings OPTION Move Language Press MENU to access the main menus. ISM Method : Normal Press the Navigation buttons to scroll to OPTION and press DPM Select : On Fail Over : Off Factory Reset Press the Navigation buttons to scroll to the setting or option Set ID you want and press OK.
- Page 49 CUSTOMIZING SETTINGS Setting Description Tile Mode Tile Mode To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location.
- Page 50 CUSTOMIZING SETTINGS Setting Description Key Lock Key input does not work. This prevents invalid key input. Interface Select Sets communication with Media Player and the connected PC. Option RS232C Communicates with the connected PC in serial mode. SuperSign Communicates with Media Player. PC Power Control Controls the power of the monitor with Media Player turned on.
- Page 51 CUSTOMIZING SETTINGS Tile Mode Tile Mode - Natural mode This monitor can be tiled with additional monitors When active, the part of the image that would to create a large tiled display. normally be displayed in the gap between the monitors is omitted.
- Page 52 CUSTOMIZING SETTINGS PIP/PBP NOTE Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and The subscreen is only supported when using the USB device. sub screens. (See p.40) Mode *PIP(Picture In Picture): Displays the Sub screen Component in the main screen.
- Page 53 CUSTOMIZING SETTINGS Picture ID Picture ID is used to change the settings of a If you press the left/right buttons or press the AUDIO specific display using a single IR receiver for multi- ON button repeatedly, the Picture ID cycles (RGB/DVI) RS-232C OUT RS-232C OUT...
- Page 54 CUSTOMIZING SETTINGS NETWORK settings NETWORK Move Player Name Setting Press MENU to access the main menus. Network Setting : None Press the Navigation buttons to scroll to NETWORK Network Status : Not connected press OK. Server IP Setting Server IP Status : Not connected Press the Navigation buttons to scroll to the setting or option you want and press OK.
- Page 55 MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the ports on the Monitor’s back panel. Find an external device you want to connect to your Monitor shown on the following illustration. Check the connection type of the external device. Go to the appropriate illustration and check the connection details.
- Page 56 MAKING CONNECTIONS Connecting to a HD receiver, Component connection DVD, Camcorder, Camera, Transmits the analog video and audio signals Gaming Device or VCR player from an external device to the Monitor. Connect the external device and the Monitor with the 15 Connect a HD receiver, DVD, or VCR player to the pin signal to RCA cable as shown on the following Monitor and select an appropriate input mode.
- Page 57 MAKING CONNECTIONS Connecting to a USB AV(CVBS) connection Transmits the analog video and audio signals Connect a USB storage device such as s USB from an external device to the Monitor. Connect flash memory, external hard drive, MP3 player or the external device and the Monitor with the 15 a USB memory card reader to the Monitor and pin signal to RCA cable as shown on the following...
- Page 58 MAKING CONNECTIONS Connecting to the LAN LAN connection Connect PC to Monitor directly. Monitor Using a router(Switch) Switch Network Monitor Using the Internet. Network Network Monitor NOTE Using LAN establishes communication between your PC and the monitor and enables to use the OSD menus on the PC as well as on the monitor.
- Page 59 MAKING CONNECTIONS Daisy Chain Monitors Use this function to share the RGB or DVI video signal with other monitors without having to use a separate signal splitter box. To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub or DVI Signal Cable) to the RGB OUT or DVI OUT connector of product 1 and connect the other end to the RGB IN or DVI IN connector of other products Monitor 4...
- Page 60 Did you install the driver? y Install the product driver, which is provided with the product, or download it from the web site. (http://www.lg.com) y See if the plug&play function is supported by referring to the video card user manual.
- Page 61 TROUBLESHOOTING 'Key Lock On' message appears. Problem Resolution The 'Key Lock On' message The Lock function prevents the OSD settings from being changed appears when pressing the inadvertently. To release the lock, go to Menu and Option and disable Menu button. the Key Lock option.
- Page 62 TROUBLESHOOTING The audio function does not work. Problem Resolution No sound? y See if the audio cable is connected properly. y Adjust the volume. y See if the sound is set properly. Sound is too dull. y Adjust the Clear Voice ll, Treble and Bass appropriately. Sound is too low.
- Page 63 SPECIFICATIONS SPECIFICATIONS 42WS50MS 42WS50BS LCD Panel Screen Type 1067.31 mm Wide (42 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1067.31 mm Pixel Pitch 0.4845 mm (H) x 0.4845 mm (V) Video Signal Max. Resolution RGB : 1920 X 1080 @60 Hz HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz - It may not be supported depending on the OS or video card type.
- Page 64 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 961.6 mm x 554.5 mm x 31.9 mm / 13.7 kg 961.6 mm x 628.9 mm x 298.3 mm / 15.1 kg 961.6 mm x 554.5 mm x 81.5 mm / 14.5 kg 961.6 mm x 628.9 mm x 298.3 mm / 15.9 kg * Applicable only for models that support the speakers Audio...
- Page 65 SPECIFICATIONS 47WS50MS 47WS50BS LCD Panel Screen Type 1192.87 mm Wide (47 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.87 mm Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V) Video Signal Max. Resolution...
- Page 66 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1071.8 mm x 616 mm x 31 mm / 15.7 kg 1071.8 mm x 690.4 mm x 298.3 mm / 17 kg 1071.8 mm x 616 mm x 80.6 mm / 16.6 kg 1071.8 mm x 690.4 mm x 298.3 mm / 17.9 kg * Applicable only for models that support the speakers Audio...
- Page 67 SPECIFICATIONS 55WS50MS 55WS50BS LCD Panel Screen Type 1387.80 mm Wide (54.6 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1387.80 mm Pixel Pitch 0.630 mm (H) x 0.630 mm (V) Video Signal Max. Resolution RGB : 1920 X 1080 @60 Hz HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz - It may not be supported depending on the OS or video card type.
- Page 68 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1241.9 mm X 712.6 mm X 32.2 mm/ 23.5 Kg 1241.9 mm X 790.8 mm X 296 mm/ 28.5 Kg 1241.9 mm X 712.6 mm x 32.3mm / 24.4 Kg 1241.9 mm X 790.8 mm X 296 mm / 28.5 Kg * Applicable only for models that support the speakers Audio RMS Audio Output...
- Page 69 Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the "Mounting on a wall" section for sizes of screws. ( See p.12 ) (Unit : mm) 42WS50MS 47WS50MS 42WS50BS 47WS50BS 961.6 1071.8 11.5 11.5...
- Page 70 SPECIFICATIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the "Mounting on a wall" section for sizes of screws. ( See p.12 ) 55WS50MS 55WS50BS (Unit : mm) 1241.9 11.2 32.2 53.7 128.7 980.8 156.3...
- Page 71 SPECIFICATIONS DTV Mode RGB (PC) supported mode HDMI,Display Horizontal Vertical Resolution Component Resolution Port (DTV) Frequency(kHz) Frequency(Hz) 480i 31.469 70.8 640 x 350 576i 31.468 70.8 720 x 400 480p 31.469 59.94 640 x 480 576p 37.5 640 x 480 720p 37.879 60.317...
- Page 72 IR CODES IR CODES All models do not support the HDMI/USB function. Some key codes are not supported depending on the model. Code (Hexa) Function Note Energy Saving ( R/C BUTTON R/C BUTTON (ON/OFF) POWER INPUT R/C BUTTON Monitor On R/C BUTTON Monitor Off R/C BUTTON...
- Page 73 CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 99 without being duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture.
- Page 74 CONTROLLING THE MULTIPLE PRODUCT Command Reference List COMMAND DATA (Hexadecimal) 01. Power 00 to 01 02. Input Select Refer to ‘Input Select.’ 03. Aspect Ratio Refer to ‘Aspect Ratio.’ 04. Energy Saving Refer to ‘Energy Saving.’ 05. Picture mode Refer to ‘Picture mode.’ 06.
- Page 75 CONTROLLING THE MULTIPLE PRODUCT COMMAND DATA (Hexadecimal) 37. Fail Over Input Select Refer to ‘Fail Over Input Select.’ 38. Reset 00 to 02 39. Tile Mode 00 to 01 40. Tile Mode Check 41. Tile ID Refer to ‘Tile ID.’ 42.
- Page 76 CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets regardless of their Set ID numbers.
- Page 77 CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) 04. Energy Saving (Command: j q) To control the Power On/Off the display. To set the Energy Saving function. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Off Data 00: Off 01 : On 01: Minimum...
- Page 78 CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) 10. Tint (Command: k j) To adjust the screen brightness. To adjust the screen tint. * This function is available only in AV/Component Transmission input. [k][h][ ][Set ID][ ][Data][Cr] Transmission Data 00 to 64: Brightness 0 to 100 [k][j][ ][Set ID][ ][Data][Cr] Acknowledgement Data 00 to 64: Tint R50 to G50...
- Page 79 CONTROLLING THE MULTIPLE PRODUCT 13. V Position (Command: f r) 16. Balance (Command: k t) To adjust the screen Vertical Position. To adjust the sound balance. * This function is available only when the Tile Mode is Transmission set to Off. [k][t][ ][Set ID][ ][Data][Cr] * The operational range varies depending on the Data 00 to 64: Left 50 to Right 50...
- Page 80 CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) 22. Volume Control (Command: k f) To adjust the Bass values. To set the playback volume. Transmission Transmission [k][s][ ][Set ID][ ][Data][Cr] [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: Bass 0 to 100 Data 00 to 64: Volume 0 to 100 Acknowledgement Acknowledgement...
- Page 81 CONTROLLING THE MULTIPLE PRODUCT 25. Off Timer(Repeat Mode/ Time) (Command: f e) 26. On Timer(Repeat Mode/ Time) (Command: f d) To set the Off Timer(Repeat Mode/ Time) function. To set the On Timer(Repeat mode/ Time) function. Transmission Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 Data1...
- Page 82 CONTROLLING THE MULTIPLE PRODUCT 27. On Timer Input (Command: f u) 28. Sleep Time (Command: f f) To select an external input for the current On Time To set the Sleep Time. setting and add a new schedule or change the Transmission existing schedule.
- Page 83 CONTROLLING THE MULTIPLE PRODUCT 31. Auto Off (Command: f g) 34. Power Indicator (Power Light) (Command: f p) To set the Auto Off function. To set the Power Indicator (Power Light) function. Transmission Transmission [f][g][ ][Set ID][ ][Data][Cr] [f][p][ ][Set ID][ ][Data][Cr] Data 00: Off (No off after 15 minutes) Data 00: Off 01: 15 min.(Off after 15 minutes)
- Page 84 CONTROLLING THE MULTIPLE PRODUCT 37. Fail Over Input Select (Command: m j) 40. Tile Mode Check (Command: d z) To select the input source for auto switch. To check Tile Mode status. * This command is only available when the fail over Transmission (auto) mode is set to Custom.
- Page 85 CONTROLLING THE MULTIPLE PRODUCT 43. Tile V Position (Command: d f) 46. Natural Mode (In Tile Mode) (Command : d j) To adjust the Tile Vertical position. To display the image naturally, the part of the image * This function is available only when the Natural that would normally be displayed in the gap between option of the Tile Mode is set to Off while the Tile the monitors is omitted.
- Page 86 CONTROLLING THE MULTIPLE PRODUCT 49. FAN Fault Check (Command: d w) 52. Key (Command: m c) To check the fan errors. To send a key code of the IR remote control. Transmission Transmission [d][w][ ][Set ID][ ][Data][Cr] [m][c][ ][Set ID][ ][Data][Cr] Data FF: Read the status Data IR_KEY_CODE Acknowledgement...
- Page 87 CONTROLLING THE MULTIPLE PRODUCT 55. Serial No.Check (Command: f y) 58. White Balance Green Gain (Command: j n) To check the Serial Numbers. To set the White Balance Green Gain. Transmission Transmission [f][y][ ][Set ID][ ][Data][Cr] [j][n][ ][Set ID][ ][Data][Cr] Data FF: Check the product Serial Number Data 00 to FE: Green Gain 0 to 254 Acknowledgement...
- Page 88 CONTROLLING THE MULTIPLE PRODUCT 61. PC Power Control (Command: d t) To control the PC power if the PC and the monitor are synchronized. Transmission [d][t][ ][Set ID][ ][Data][Cr] Data 00: Synchronized (When the monitor is off, the PC is also turned off.) 01: Not synchronized (The monitor is off but the PC is on.)
- Page 89 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.