Level Meters; Preset Category; Realtime Display; Preset Selector - Lexicon PCM NATIVE ROOM Owner's Manual

Harman

Table of Contents

Level Meters

Shows the input and output levels.

Presets for the algorithm are grouped into categories to make them easier to find. Clicking

in this area will show the list of categories. Selecting a category will load the presets for that

category in the Preset Selector.

Three unique visualizations help you to see inside the reverb. This is explained in greater depth

in the "Realtime Display" section of this manual.

Displays the list of presets within the selected category. Selecting a preset from the list will

cause the preset to be loaded into the plug-in.

Allows you to see the type of EQ filters that are applied to the early and late reverb signals. This

is explained in greater depth in the "EQ Window" section of this manual.

Click on the Help button to enable tooltip help. Then hover your mouse cursor over the button

or parameter you want to know about. An explanation will appear onscreen.

Parameter values are shown and controlled in this area. This is explained in more depth in the

"Fader Area" section of this manual.

These let you access all of a preset's parameters, manage presets, and compare changes you've

made to the original settings. This is explained in more detail in the "Control Buttons" section

of this manual.

Table of Contents