Strings Window; Decay/Tone Parameters; Level Meters; Preset Category - Lexicon PCM NATIVE STRINGBOX Owner's Manual

Table of Contents

Strings Window

Stringbox has a unique metering system that shows just which strings are resonating. The

strings window is a real time visual representation of the piano strings vibrating based on the

energy in each resonator. There is a string image for each note. If that string is resonating, then

the string image brightens.

The Decay/Tone parameters can also be adjusted in this graphical display by selecting

the group of Decay/Tone parameters, then left clicking and dragging the nodes on the

corresponding colored line.

Filtering, decay and level can be set here in each of 3 bands. The resulting curve is displayed in

the strings window, represented by matching color coded lines.

Shows the input, output and feedback levels. The Feedback meters measure the energy level

being fed back into the beginning of the delay line.

Presets for the algorithm are grouped into categories to make them easier to find. Clicking

in this area will show the list of categories. Selecting a category will load the presets for that

category in the Preset Selector.

Displays the list of presets within the selected category. Selecting a preset from the list will

cause the preset to be loaded into the plug-in.

These are the fader type parameters.

These buttons are used to compare, reload and store presets. This is explained in more detail in

the "Control Buttons" section of this manual.

These are the combo box type parameters. Each parameter is described in the "Parameters"

section starting on page 18.

Table of Contents