Tap Slope - Lexicon PCM NATIVE ROOM Owner's Manual

Tap Slope

This is an unusual parameter which affects the relative gain of impulses coming from the reverb.
While this parameter does not (as it might appear) make the reverb sound 'bumpy', it may affect
timbre or the overall sense of spaciousness.
Tap Slope = 0
Positive Tap Slope
Negative Tap Slope
Tap Slope can also be used to create inverse and gated effects. In this case, Reverb Time should
be at 0. Spread should be fairly high. Shape should be fairly high. Size should be fairly high. Tap
Slope should be in the range of (5 to 10). Play with spread, shape and size to vary the effect.
Impulses
Overall Decay trend
29